Elegant Wedding Portraits

To achieve Elegant Wedding Portraits, you must master the one light lighting. That’s it! No Rembrandt lighting. No broad lighting. No split-lighting. No sidelighting, or backlighting. Just the one light pattern!

The light must come from slightly above the subject’s eyes and slightly to the side
of the face. Both eyes are lit by this main light. When the light

is in proper position (shining into both eyes) a catchlight appears in the subject’s eyes at either the 1 o’clock position or at the 11 o’clock position, depending on whether the light is coming from the subject’s right side or left side. The telltale sign of the correct lighting pattern is that there is a small loop shadow that comes down and to the side of the bottom of the nose. One side of the nose is in shadow. The shadowed side of the face is always toward (closer to) the camera.

The relationship of the light to the face is universal. It never changes. As the face turns, the light moves with it. Move the face; move the light. Move the face without moving the light and you’re in trouble because then, you’re either flat-lighting the face or turning the face away from the light. Shame on you!

Does this always have to be the case? Of course not. But when you follow this simple one-step lighting pattern you can always be certain that you’re in the ballpark. You’re lighting the face correctly, creating a three-dimensional form on a flat piece of paper.

Simple posing techniques make people appear to be unposed. People don’t object to being posed. They object to looking posed in their pictures. If you can make them look natural, they’ll be thrilled. If you can make them look better than they usually look in their photographs, they’ll be ecstatic!

The Basic Pose works equally well for both men and women. Women with heavy chins/necks should always be posed in this Basic Pose. Men, of course, should always be posed in this Basic Pose when photographing them either full faced or the 2/3 angle of the face. Simply stated, the Basic Pose is one in which the head and shoulders go in the same direction. The head is tilted toward the lower shoulder so that the head is perpendicular to the slope of the shoulders. Since we are always turning faces toward the light, the subject’s body and face should be turned toward the main light for the Basic Pose. The rear shoulder is lowered when the body is turned at a 45° angle to the camera and the subject leans forward (over the “belt buckle”) toward the knees.

Now let’s try the Basic Pose, full face to the right.

After analyzing the face, you might decide to turn the subject’s face to the right. Start off with the body turned in that direction. That way, you will not have to move the light from one side of your subject to the other when changing from full face to the other two facial angles.

For the Basic Pose the shoulders are always turned at a 45° angle to the camera. It may be a good idea to begin by positioning your subject so that one shoulder is going directly into the lens. Then, when you extend the far elbow out to form a base for the composition, the body will automatically fall into a 45° angle to the camera.

Notice how the head is tipped toward the low shoulder and facing directly into the camera. I usually place the height of the lens for all head and shoulder portraits slightly above the eye level of the subject. Then, while looking through the lens I have the subject raise or lower the chin to see the normal perspective of the face. This is the only way to know exactly what the camera will be recording. No surprises!

The portrait is usually cropped, so that if you were to draw a line straight down from the chin there is an equal amount of the subject’s body on both sides of that line.

Basic Pose, 2/3 view of the face to the right.

Leave the body exactly as is, still at a 45° angle to the camera. Turn the head until the eye on the far side of the face comes almost to the edge of the outline of the face. This is the 2/3 view of the face. It slims the face down considerably from the full face position. It brings out the cheekbones. It is usually the most flattering view of most faces. The head is still tipped to the lower shoulder. The only difference between the positioning of the light for the full face or the 2/3 view is that the light must move farther around the subject. This is done to maintain the same light pattern as before. The eyes are usually centered in the eye sockets, as seen from camera position. Occasionally, it might be good to position a woman’s face at this angle and still have her looking back toward the camera. It doesn’t work for a man. If the bridge of the subject’s nose is fairly high, it may begin to hide some of the eye on the far side of the face. Do not let this happen. Bring the face back toward the lens until the nose does not interfere with the full view of the far eye. Be careful not to let the tip of the nose come too close to the edge of the face or cross through the outline of the face into the background. When that happens one gets a very distorted view of the face. You create little pockets of flesh between the upper lip and the nose, as well as small pieces of the face between the upper part of the nose and the eye.

Basic Pose Profile To The Right
There is no Basic Pose when you’re photographing a subject in profile. The pose for a profile is always the Feminine Pose. We’ll discuss this later in this article.

Basic Pose Full Face To The Left
This is the same as the full face in the other direction. This is the way to begin if you know that you are going to be turning the subject’s face to his/her left.
Basic Pose, 2/3 View Of The Face To The Left
The same applies in the other direction.

Profile To The Left
As you can see, the profile in either direction is always in a Feminine Pose, whether it’s for a man or a woman. You need the body at a 45° angle to the camera so that it can support this view of the face.

The Feminine Pose
The Feminine Pose is one in which the head is turned and tipped toward the high shoulder. The woman’s body is turned away from the source of light. Her head is turned back to the light. The light is placed to get into both of her eyes, creating our singular light pattern, regardless of what angle of the face is to be photographed. Slim women look elegant in the Feminine Pose. Women with a heavy jaw line should be posed in a Basic Pose, rather than in a Feminine Pose. A Feminine Pose would accentuate the heaviness in the neckline area and be very unflattering. Everyone (men and women, alike) should be posed in the Feminine Pose for a profile picture. That is the only way in which you can show enough of the body to properly support that view of the face. The high/low shoulder is achieved by the lean of the subject’s body. The body leans slightly forward (over the “belt buckle”). At the same time the body leans in the opposite direction from the way the head is turned. Thus, if the subject turns her/his head to the left, the body leans slightly to the right.

Remember, the head turns and tips to the same shoulder. Some people inadvertently turn the head to one shoulder, while tipping it toward the other. Not good!

When turning a head for the Feminine Pose one should be careful not to turn the face beyond the point where the cord in the neckline would stand out too much and distort her neckline. If one observes the correct body/shoulder position for each view of the face in the Feminine Pose, this will not happen. Thus, for A full face picture the woman’s body is turned approximately at a 45° angle to the lens. At this point the relationship of her head to her shoulders becomes solid. If she turns in any direction, the relationship between the head and shoulders remains as is.

Now, the same exact pose--viewed from a different perspective. This is the 2/3 view of a woman in the Feminine Pose. Her body for this head and shoulder portrait is turned straight into the lens. This is the only time that it’s advisable to turn a person’s shoulders straight toward the camera.

For this picture I chose to turn her body and face. Then, I moved the light slightly to her left to retain the same lighting pattern on her face.

Finally, for her profile turn her body once more, at a 45° angle to the camera. Now, study the 2/3 view of her face and her profile facing in the other direction. Of course, the same things apply here as when she was turning her head to her left shoulder. The only difference is that the main light is now coming from her right side.

The shoulder position for the 2/3 view is toward the lens, while the body turns once again to a 45° angle for her profile. She’s like a statue. Move any part of the pose and the entire body moves with it.

Wrapping it all up in a neat package.

None of this, probably, will sink in simply by reading this material. It is imperative that you work with it and refer back to it while you’re creating portraits and after you’ve completed them. Eventually, you’ll find that these simple steps to fine portraiture will create the platform from which you can launch in any direction you wish to go.**